Product Options (Snap-Out Carbonless Forms)

"Parts" refers to number of copies in your form . Example : if your form has white , yellow , and pink copies, it is a 3 part form .

Standard paper weight for snapout forms is 15lb .

You can change the paper weight of part 1 to 20lb by choosing the "20lb White Paper for part 1 " option .

Part one can be changed to a 20lb white paper weight vs. our standard 15lb .

Use this option for forms with a heavier manilla card stock on the back page.

Tag is currently only available for 2 part 3 part forms .

Standard :

2 part - white , yellow                                        

3 part - white , yellow , pink

4 part - white , yellow , pink , gold

Any other sequence is considered non - standard .

Example of non standard paper sequence for a 4 part form: White , green , yellow , pink

Available colors : yellow , pink , green , blue , gold

1 color 1 side means each part of your form will print on one side in 1 color of ink.

1 position red consecutive crash numbering.

Number can be placed anywhere on the page.

Crash numbering means the number appears red on part 1 and is a carbonless image on the parts below it.

Numbers are 3/16" tall .   123457

2 hole punching :

2 - 1/4" holes , 2 3/4" on center 

3 hole punching :

3 - 1/4" holes , 4 1/4" on center

holes are drilled through all parts

* contact customer service for other configurations

* If your forms are numbered enter a starting number here .

* Numbering must be at least 4 digits and no more than 8 digits . If your starting number is "1" your number will appear as 0001 .

Copy changes are for forms that have different copy printed on different parts.

Example1: blockout printed on part 3 of a 3 part form . Also use for if back printing changes from part to part.

Example 2: If you form has a copy change on part 2 of your 2 part form and the copy prints different on the back of each part you would have 2 additional plates.

By choosing "one full perforation " the cost will be added for one full horizontal or vertical perforation on all parts .

Please show on your artwork the location of perforation.

For multiple perforations contact customer service .

The stub perforation is not considered an extra perforation.

Standard packaging is 100's

Tell us here if you would like a proof sent back to you.

Include any comments about ink colors numbering positions ect.